Serial Attached SCSI - SAS Adapters  - 6 Gb/s

SAS Drive Adapters (Backplanes & Cables)

These adapters are used to connect either a SAS drive or SATA drive to a SAS or SATA Host Bus Adapter.  If connected to either a SATA controller (HBA) or a SATA drive, then only the primary port will be active.

  • Adapters listed on this page:
    ADP-4000
    ADP-4100
    ADP-4200
    BP-DR
    BP-2
    DR-2
    4XT-QuadDR
    ML-QuadDR

  • ADP-4000: Dual port SAS Single Drive Adapter .75" x 3.95" Form Factor Click for larger picture!

    ADP-4000: "Hot-Swap" SAS Drives at a fraction of the cost of a backplane Designed to fit a 1" high, 3.5" SAS Drive, the ADP-4000 provides the Hot-Swap SCA Drive Connector and (2) 7-Pin Signal connectors for redundant host applications. A standard power connector provides +12V,+5V and +3.3V (Optional).

    The .75"x 3.95" form factor is identical to our SATA ADP-3800 Adapter so you can move up to SAS with no changes to your enclosure's mounting scheme. Remember: "A SATA drive will plug into a SAS connector but a SAS drive will not plug into a SATA connector."

     

     

     

     

  • ADP-4100: Dual port SAS Single Drive Adapter 1.25" x 4.25" Form Factor Click for larger picture!

    ADP-4100: The ADP-4100 is functionally identical to the ADP-4000 but in a 1.25" x 4.250" form factor. The ADP-4100 is the same overall size and mounting dimensions as our SATA ADP-3900

     

     

     

     

  • ADP-4200: Dual port SAS Single Drive Adapter .6" x 2.76" Form Factor Click for larger picture!

    ADP-4200: "Hot-Swap" Drive Adapter for 2.5" & 3.5" Drives. It measures .6" high and 2.76" wide for high-density drive arrays, and easily mounts to your hardware for Hot-Swapping of 2.5" Drives. The 29-pin drive "docking" connector and (2) 7-Pin Signal connectors (for redundant SAS host applications) provides an ideal mounting platform for SAS and SATA Drives. Standard power connector provides +12V and +5V (Optional 3.3V).
    Now Rated for 6 GB SAS!

     

     

     

     

  • BP-DR  SAS Drive Extension Cable (29-pin Male-to-Female)

    This is a fully-populated 2-Lane SAS Extension Cable. Can be used to remotely locate a SAS drive for bench-top evaluation, etc. Extends SAS backplane connection. Has 3.3v, 5v, and 12v power lines.

    SAS Drive fully-populated 2-Lane SAS Extension Cable. Click for larger picture!

    BP-DR/.5: .5 Meter SAS Drive extension cable

    BP-DR/1: 1 Meter SAS Drive extension cable

     

     

     

     

     

     

  • BP-2  SAS Adapter Cable - SAS Backplane to Signal Cables w/ Power

    SFF-8482 Connector is same as on SAS drive - plugs onto SAS backplane and breaks out (2) signal and (1) power lead. Click for larger picture!SFF-8482
    Connector is same as on SAS drive - plugs onto SAS backplane and breaks out (2) signal and (1) power lead. Used for system analysis, etc.

     

     

    BP-2/.5m: .5 meter SAS Backplane Breakout Cable - plugs into backplane and provides (2) Signal Cables & Power Lead
    BP-2/1m: 1 meter SAS Backplane Breakout Cable - plugs into backplane and provides (2) Signal Cables & Power Lead

    Note: Power Lead is .15m( ~6"), regardless of Signal cable length. Order the following if needed:
    PWR-1006 Male-Fem 6"
    PWR-0018 Male-Fem 18"
    PWR-0039 Male-Fem 1 meter

    1x SATA SAS Style Click for larger picture!1x SATA SAS Style

     

     

     

     

     

  • DR-2  SAS Adapter Cable - SAS Drive to Signal Cables w/ Power

    Connector is same as on SAS backplane. It plugs onto SAS drive and breaks out power & one or two signal cables. Click for larger picture!Connector is same as on SAS backplane. It plugs onto SAS drive and breaks out power & one or two signal cables. Used for system analysis, etc.

     

     

    DR-2/.5m: .5 meter SAS Drive Breakout Cable - plugs into Drive and provides (2) Signal Cables & Power Leads
    DR-2/1m: 1 meter SAS Drive Breakout Cable - plugs into Drive and provides (2) Signal Cables & Power Leads
    DR-1/.5m: .5 meter SAS Drive Breakout Cable - plugs into Drive and provides (1) Signal Cable & Power Lead
    DR-1/1m: 1 meter SAS Drive Breakout Cable - plugs into Drive and provides (1) Signal Cable & Power Lead

    Note: Power Lead is .15m( ~6"), regardless of Signal cable length. Order the following if needed:
    PWR-1006 Male-Fem 6"
    PWR-0018 Male-Fem 18"
    PWR-0039 Male-Fem 1 meter

     

  • 4XT-QuadDR-T  SAS Adapter Cable - 4XT SAS to Direct connect to SAS Drive

    SFF-8470 SAS Connector Click for larger picture!SFF-8470 SAS Connector

     

     

     

    4XT-QuadDR-T/.5: .5 Meter SAS cable using Madison Twin Shielded signal cable; SAS 4X to (4) SAS drive connections w/Power
    4XT-QuadDR-T/1: 1 Meter SAS cable using Madison Twin Shielded signal cable; SAS 4X to (4) SAS drive connections w/Power
    4XT-QuadDR-T/2: 2 Meter SAS cable using Madison Twin Shielded signal cable; SAS 4X to (4) SAS drive connections w/Power
    4XT-QuadDR/.5: .5 Meter Flat Red SAS cable; SAS 4X to (4) SAS drive connections w/Power
    4XT-QuadDR/1: 1 Meter Flat Red SAS cable; SAS 4X to (4) SAS drive connections w/Power
    4XT-QuadDR/2:2 Meter Flat Red SAS cable; SAS 4X to (4) SAS drive connections w/Power

    SFF-8482 SAS Connector Click for larger picture!SFF-8482  SAS Connector

     

     

     

     

     

  • ML-Quad DR SAS Adapter Cable - MultiLane 4i SAS to Direct connect to SAS Drive

    SFF-8484 SAS Connector Click for larger picture!SFF-8484 SAS Connector

     

     

    ML-Quad DR/.5: .5 Meter Flat Red SAS cable; MultiLane SAS 4i to (4) SAS drive connections w/Power
    ML-Quad DR/1: 1 Meter Flat Red SAS cable; MultiLane SAS 4i to (4) SAS drive connections w/Power

    SFF-8482-Red SAS cable Click for larger picture!SFF-8482-Red SAS cable